Extron TLP Pro 1020M Touchpanel Windows 8 X64 Driver Download


Download Now
Extron TLP Pro 1020M Touchpanel Driver

For Use By Extron Resellers Only. PART NO. MODEL . TLP Pro M. 10" Wall Mount TouchLink® Pro Touchpanel - Black. $2, New Touchlink Pro Touchpanels from Extron See more ideas about Control system, TLP Pro M, TLP Pro T - 10" TouchLink Pro Touchpanels. The Extron TLP Pro M is a 10" wall mount touchpanel featuring a sleek design pour TLP Pro M, Pour ouvertures TLP MV et TLP Pro M.


New Drivers: Extron TLP Pro 1020M Touchpanel

Type: Driver
Rating:
3.86
26 (3.86)
Downloads: 994
File Size: 15.69Mb
Supported systems: Windows XP/Vista/7/8/10, MacOS 10/X
Price: Free* [*Free Registration Required]

Download Now
Extron TLP Pro 1020M Touchpanel Driver

It blinks red if the touchpanel has been configured but is not connected to an IP Link Pro control processor. It is permanently lit if the touchpanel has not been configured and is not connected to an IP Extron TLP Pro 1020M Touchpanel Pro control processor.

Extron Electronics TLP Pro 720M Setup Manual Page 3

Of the five testing booths, the first four are designed for independent use as training and concept testing workstations and the fifth offers comprehensive usability testing as well as monitoring options. The collaboration space Extron TLP Pro 1020M Touchpanel a large conference table that is sectioned into five areas, referred to as Pods.

Read More Unique Facility Designed for Learning This Usability Lab is specialized, in that it was purposefully built for usability studies to ensure that the environment does not interfere with the testing. Designed with flexibility at its core, it has been equipped with a broad variety of technology, supporting usability testing at many different levels of sophistication.

Usability Lab - Humber College

The other touchpanels in this user guide can be used in similar configurations. Installation Overview Installation Overview Before starting, download and install the latest versions of the following software: Global Configurator Plus and Global Configurator Professional — for setting Extron TLP Pro 1020M Touchpanel and configuring the control processor and touchpanel.

Extron TLP Pro 1020M Touchpanel Vista

Panel Features Panel Features This section describes: When the firmware is uploaded, the screen shows the message Restarting Once the firmware is installed, the panel can be calibrated Extron TLP Pro 1020M Touchpanel the on-screen menus or the TouchLink panel web pages. Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

You must remove the back cover before you can remove the base cover. Locking Screw Locking Plate Figure Locking Plate and Locking Screw 2.

Remove the Extron TLP Pro 1020M Touchpanel holding the locking plate at the bottom of the base. This releases the weight, which can be removed from the top of the base, leaving the mounting hole that will fit over the conduit of the SMA Attach the conduit, insulation disk, and swivel Extron TLP Pro 1020M Touchpanel and configure the set screws to allow for the degree of swivel that is required see the SMA-1 Swivel Mount Adapter Kit User Guide, available at www.

Place the mounting hole in the base over the conduit of the SMA If necessary, cut the zip tie holding the twisted pair cables to the touchpanel base.

TLP Pro M - TouchLink Pro Touchpanels Extron

If necessary, remove the cables from the cable runway in the base. Remove the four spanner drive security screws holding the hinges to the touchpanel. The spanner drive screws holding Extron TLP Pro 1020M Touchpanel hinges require a 6 spanner bit or 6 spanner head screwdriver not provided. Lift the TLP away from the base.

Extron TLP Pro 1020M manual

If necessary, connect the cables and use a zip tie to secure them to the back of the touchpanel. Follow the instructions Extron TLP Pro 1020M Touchpanel with the mounting kit. The following tables provide that information as a reference for network planning and troubleshooting. The following definitions apply: Use Factory Firmware This mode is used to boot up the unit with factory-installed firmware for a single power cycle in the event of a firmware update that failed or incompatibility issues arising with user-loaded Extron TLP Pro 1020M Touchpanel Activation To start the Use Factory Firmware reset mode and replace firmware: On the touchpanel, hold down the recessed Reset button while applying power to the unit.

When power is restored, the Reset LED lights. Hold the Reset button for a further two seconds before releasing it. The touchpanel enters factory firmware mode.

Extron TLP Pro 1020M Touchpanel Drivers for Mac

Upload new firmware to the unit as desired see Updating the Firmware on page Do not continue to operate the touchpanel using the factory firmware version. If you want to use the factory default firmware, you must upload that version again see Updating the Firmware on page Result The unit reverts to factory-installed firmware. Event scripting does not start if the unit is powered on in this mode.

  • Download Extron TLP Pro M Touchpanel Firmware b for OS Independent
  • Extron electronics TLP Pro M Setup Manual (Page 3 of 4)
  • Extron TLP Pro M 10" Wall mount TouchLink Pro Touchpanel
  • Extron Electronics TouchLink TLP Pro 1020 Series User Manual
  • Take a 360 degree tour!

All user files and settings such as drivers, adjustments, and IP settings are maintained. To return the unit to the firmware version that was running prior to the reset, cycle power to the unit.

Extron TLP Pro M manual

Activation To reset all IP settings: Hold down the Reset button for about 6 seconds until the Power LED blinks twice once at 3 seconds and again at 6 seconds. Nothing happens if the momentary press does not occur within 1 second.

Reset to Factory Defaults This mode resets all IP settings and touchpanel settings to factory defaults and removes all configurations.

Related Drivers