Biostar TH61 Driver
Find great deals for Biostar TH61 ITX, LGA , Intel Motherboard. Shop with confidence on eBay! TH61 ITX Intel H61 Supports the Intel 2nd generation Core i7 and Core i5 processors in the package Intel H61 single chip architecture 95W Sandy Bridge. Specifications. Manufacturer. Biostar. Part #. TH61 ITX. Color. Black / Red. Form Factor. Mini ITX. CPU Socket. LGA Chipset. Intel H Memory Slots.
|Supported systems:||Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5|
|Price:||Free* [*Free Registration Required]|
Biostar TH61 Driver
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Biostar TH61 ITX, LGA , Intel Motherboard eBay
This equipment generates, uses, and can radiate radio frequency energy Biostar TH61, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation.
- Biostar TH61 ITX Owner's Manual
The vendor makes no representations or warranties with respect to the contents here and specially disclaims any implied warranties of merchantability or fitness for any Biostar TH61. Further the vendor Biostar TH61 the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand.
All the brand and product names are trademarks of their respective companies. Before you start Biostar TH61 the motherboard, please make sure you follow the instructions below: Always disconnect the computer from power outlet Biostar TH61 operation. Before you take the motherboard out from anti-static bag, ground yourself properly by touching any safely grounded appliance, or use grounded wrist strap to remove the static charge.
Avoid touching the components on motherboard or the rear side of the board unless necessary. Hold the board on the edge, Biostar TH61 not try to bend or flex the board. Do not leave any unfastened small parts inside the case after installation.
Biostar TH61 ITX - motherboard - mini ITX - LGA Socket - H61 Overview - CNET
Loose parts will cause short circuits which may damage the equipment. Keep the computer from dangerous area, such as heat source, humid air and water.
The operating temperatures of the computer should be 0 to 45 degrees Celsius. The package contents may be different due to area or your motherboard version.
X is controlled by H Remove Pin Cap before installation, and make good preservation for future use. Pull the socket locking lever out from the Biostar TH61 and then raise the lever up. Remove the Pin Cap. Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut Biostar TH61.
The CPU will fit only in the correct orientation. Hold the CPU down firmly, and then lower the lever to locked Biostar TH61 to complete the installation.
The fan cable and connector Biostar TH61 be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin 1. When Biostar TH61 with wires onto connectors, please note that the red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND.
Memory Modules 8 1. Unlock a DIMM slot by pressing the retaining clips outward.
Install memory module of the same Biostar TH61 in pairs, shown in the table. PCI-Express Gen2 supports a raw bit-rate of 5. Pin opened Pin closed Pin closed 3.
Header for USB 2.