Asrock K8Upgrade-PCIE SiS Ethernet Device Driver
Asrock SM Asrock K8Upgrade-PCIE SiS /10 Ethernet Device SiS /10 Ethernet Device SiS //10 Ethernet Device. Providers. You can free and without registration download the drivers, utilities, software, manuals & firmware or BIOS for your ASRock K8Upgrade-PCIE Motherboard on. Buy Asrock K8Upgrade K8 Upgrade SiS GX Socket microATX Number of PCI/PCI-Express Slots. 2. Number Realtek RTL 10/ Ethernet LAN.
|Supported systems:||Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X|
|Price:||Free* [*Free Registration Required]|
Asrock K8Upgrade-PCIE SiS Ethernet Device Driver
No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Specifications and information contained in this manual are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this manual. With respect to the contents of this manual, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages including damages for loss of profits, loss of business, loss of data, interruption of business and the likeeven if ASRock has been advised of the possibility of such damages arising from any defect or error in the manual or product.
Operation is subject to the following two conditions: Hardware Health Event Monitoring Screen In this Asrock K8Upgrade-PCIE SiS Ethernet Device, chapter 1 and 2 contain introduction of the motherboard and step-bystep guide Asrock K8Upgrade-PCIE SiS Ethernet Device the hardware installation.
Asrock K8UPGRADEGX motherboard
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice.
Supports up to 2 Floppy Disk Drives Audio: While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the 3.
- Asrock K8Upgrade-PCIE drivers
- Asrock K8Upgrade K8 Upgrade SiS GX Socket microATX Audio/Video/LAN/SATA - (Discontinued)
- Security & Privacy
CPU and the heatsink when you install the PC system. Do NOT use a 3. It may cause permanent damage! Power Management for USB 2.
Mic In 28 1 Center: Line Out 32 31 30 29 Top: Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.
Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Unplug the power cord from the wall socket before touching any component.
To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.
Drivers and utilities for motherboards ASRock:
Hold components by the edges and do not touch the ICs. Whenever Asrock K8Upgrade-PCIE SiS Ethernet Device uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component. When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.
ASRock > K8Upgrade-PCIE
Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation.
The lever clicks on the side tab to indicate that it is locked. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
Drivers and utilites for ASRock motherboards - choice of model.
For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Unlock a DIMM slot by pressing the retaining clips outward.